Clippers Series (1k/2k/3k)

Print Friendly, PDF & Email

FSP Clippers series is a premium featured online double conversion UPS with Rack/Tower design and high efficiency to reduce customer ‘s total cost of ownership. The internal hot-swappable battery increases system reliability and reduce MTTR; the parallel function is designed for future equipment expansion. Its special firmware design can adapt various applications like laser printer, ultrasound device and supporting long back-up time with battery monitoring.


    • True double-conversion
    • Output power factor=1
    • Output voltage regulation < 1%
    • Higher output crest ratio 3:1
    • 50Hz/60Hz frequency converter mode
    • Programmable power management outlets
    • Emergency power off function (EPO)
    • Hot swappable battery design
    • ECO mode for energy saving
    • Support for laser printers and ultrasound systems
    • Full time over voltage cut-off and surge protection
    • High power factor charger with low ripple current
    • Low input THDi to reduce power system pollution
    • Adjustable charging current via LCD panel
    • Smart battery charger design to optimize battery performance
    • Genset compatible




Model Clippers 1K Clippers 2K Clippers 3K
Capacity 1000 VA / 1000W 2000 VA / 2000W 3000 VA / 3000W
Input Voltage Range 110-300 VAC ±5%
Input Frequency 40Hz ~ 70Hz
Power Factor ≥ 0.99 @ Nominal Voltage (100% load)
Output Voltage ± 1% (Batt. Mode)
Output Frequency Range 46 Hz ~ 54 Hz or 56Hz ~ 64 Hz (Synchronized Range)
50 Hz or 60 Hz ±0.1 Hz (Batt. Mode)
Current Crest Ratio 3:1
Harmonic Distortion ≤ 2 % THD (Linear Load)
≤ 4 % THD (Non-linear Load)
Output Transfer Time (Typical) Zero (AC to DC)
4ms (Inverter to Bypass)
Output Waveform (Batt. Mode) Pure Sinewave
Battery Type & Number 12V / 9Ah x 2 12V / 9Ah x 4 12V / 9Ah x 6
EMC/ Safety EMC EN62040-2 C2 for CE models
Typical Recharge Time (up to 90% capacity) 3 hours
Indicators / AC Mode
Indicators / Battery Mode
Indicators / Battery level
Indicators / Load level
Indicators / Bypass mode
Indicators / Fault
Alarm / Battery Mode Sounding every 4 seconds
Alarm / Low Battery Sounding every second (Batt. Mode)
Alarm / Overload Sounding twice per second
Alarm / Fault Continuously sounding
Physical Dimension (mm) 438 x 88 x 410 438 x 88 x 510 438 x 88 x 630
Physical Net Weight (kg)
Standard Model
11.6 19.5 27.5
Backup Time Full load up to 33 minutes (with 2 external battery pack)
Operating Environment / Humidity 20-90 % RH @ 0- 40°C (non-condensing)
Operating Environment / Noise Level 50dB @ 1 Meter
Management / Optional USB / RS-232 Port Supports Windows® 98/XP/2000/Vista/7/8/10, Windows® Server 2000/2003/2008/2012/2016, Linux, and MAC
Optional SNMP Power management from SNMP manager and web browser

Run-Time Table per Loading


Minutes (Clippers 1K)



Minutes (Clippers 2K)



Minutes (Clippers 3K)

External Battery Pack

  • BB-24/18RT: for Clippers 1K with 4pcs 9Ah 12V battery inside
  • BB-48/18RT: for Clippers 2K with 8pcs 9Ah 12V battery inside
  • BB-72/18RT: for Clippers 3K with 12pcs 9Ah 12V battery inside

Network Management

  • SNMP card
  • SNMP box
  • Modbus card
  • Relay card


ViewPower – Monitoring Software

ViewPower is an advanced UPS management software. It allows remote monitor and manage from one to multiple UPSs in a networked environment, either LAN or INTERNET. It can not only prevent data loss from power outage and safely shutdown systems, but also store programming data and scheduled shutdown UPSs.

Feature summary :
• Allows control and monitoring of multiple UPSs via LAN and INTERNET
• Supports auto and manual online upgrade
• User-friendly power analysis graph: event statistics, history data chart export
• Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level)
• Safely OS shutdown and protection from data loss during power failure
• Warning notifications via audible alarm, broadcast, mobile messenger, and e-mail
• Scheduled UPS on/off, battery test, programmable outlet control, and audible alarm control
• Password security protection and remote access management
• Supports multiple languages: English, Chinese, French, German, Spanish, Russian, Portuguese, Ukrainian, Italian, Polish, Czech, Turkish


Comments are closed.